Oil mist collector selection should start with the machine enclosure, process, coolant and operating conditions—not airflow alone. TINME currently lists four centrifugal collector models in the supplied 50Hz specification.
Verified model comparison
| Model | Airflow at 50Hz | Motor | Inlet | Weight | Dimensions |
|---|---|---|---|---|---|
| TM-250A | 600 m3/h | 0.25 kW | 125 mm | 23 kg | 390 x 820 mm |
| TM-370A | 1,000 m3/h | 0.37 kW | 150 mm | 36 kg | 440 x 950 mm |
| TM-750A | 1,400 m3/h | 0.75 kW | 150 mm | 40 kg | 480 x 950 mm |
| TM-1100A | 2,000 m3/h | 1.1 kW | 150 mm | 52 kg | 540 x 1,150 mm |
All four models use 3-phase 220V/380V, 50Hz/60Hz power and a listed motor speed of 2,850 rpm. Exact 60Hz airflow values require confirmation.
Information needed before model selection
- Machine type and model
- Enclosure dimensions and available mounting space
- Coolant type, including neat oil or water-miscible coolant
- Machining process and operating cycle
- Observed mist, smoke and particulate conditions
- Available voltage and frequency
- Preferred machine-top, floor or wall-bracket installation
Avoid selecting by machine brand alone
Two machines from the same manufacturer can have different enclosure volumes, processes and mist loads. Installation photographs can show mounting possibilities, but they do not replace an application review.
Discuss Your CNC Oil Mist Application
Send the machine type, enclosure size, coolant, operating conditions and available power supply for model-selection support.
Request Application Advice